Large Angel Wings
X Large Pair of Stone Effect Gilded Angel Wings Wall Hangings 102cm High

X Large Pair of Stone Effect Gilded Angel Wings Wall Hangings – 102cm High. This very large pair of beautifully detailed gilded stone effect angel wings are a great piece of wall art in any home. Size: Height 102 x Width 31 x Depth 5 cm each. The item “X Large Pair of Stone Effect Gilded Angel Wings Wall Hangings 102cm High” is in sale since Monday, June 11, 2018. This item is in the category “Home, Furniture & DIY\Home Decor\Wall Hangings”. The seller is “lane-end” and is located in Retford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
  • Brand: Unbranded
  • Main Colour: Gold
  • Material: Stone Effect Resin
  • Pattern: No Pattern
  • Theme: Angels & Cherubs
  • MPN: Does Not Apply
  • Type: Wall Hangings
  • Room: Any
  • Style: Antique Style
  • Size: Height 102 x Width 31 x Depth 5 cm each
X Large Pair of Stone Effect Gilded Angel Wings Wall Hangings 102cm High

X Large Pair of Stone Effect Gilded Angel Wings Wall Hangings – 102cm High. This very large pair of beautifully detailed gilded stone effect angel wings are a great piece of wall art in any home. Size: Height 102 x Width 31 x Depth 5 cm each. The item “X Large Pair of Stone Effect Gilded Angel Wings Wall Hangings 102cm High” is in sale since Wednesday, March 14, 2018. This item is in the category “Home, Furniture & DIY\Home Decor\Wall Hangings”. The seller is “lane-end” and is located in Retford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
  • Brand: Unbranded
  • Main Colour: Gold
  • Material: Stone Effect Resin
  • Pattern: No Pattern
  • Theme: Angels & Cherubs
  • MPN: Does Not Apply
  • Type: Wall Hangings
  • Room: Any
  • Style: Antique Style
  • Size: Height 102 x Width 31 x Depth 5 cm each
Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine. Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024. A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. This sculpture is Abstract Figurative Bronze Angel sculptures or statues for Sale. This Limited Edition original was designed using the lost wax method that allows for the excellent quality of the piece. It is numbered by the artist Watson. Bronze Sculpture Casting Tour. The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy. The Lost Wax Casting Process. Here Artist original clay sculpture is nearly ready for the foundry. Note the artist is still adding the finishing touches. Most sculptors prefer to work with clay or wax; some however, do use wood and other mediums. Here the finished original clay is now complete. The first step can be shocking for some as they begin to decide how this original will be cut up. In order to prepare the original clay sculpture for molding, it will be dissected by cutting the clay with wire and by cutting the armature with a saw. The armature is what helped support the clay in place while the artist was creating it. Note the registration marks which later in the process will serve to realign the parts. Shown here are the sections of the original clay sculpture after having been dissected. Now the various parts of the original are carefully mounted on clay plugs before the rubber mold material is applied. The clay plug later serves as a pour spout for the mold. As you can see now they begin painting the latex rubber onto the original together with the clay plus that’s been added in layers. Notice the shim line that will alter serve as a separation line for dividing the mold in half. A lock and tab system has been applied (see the edge) so that the mold will be able to be opened and closed securely. Once the rubber mold has been completed, a plaster or fiberglass “mother” mold is applied to the outside which will preserve the integrity of the rubber mold. The “mother” mold is now complete, the next step is to separate the two halves of the mold and remove the original from inside. The next step is to remove the artists’ original and reassemble the clean, empty mold. Now a way pattern will be poured by building several layers of the hot wax within the rubber mold. A layer is poured, allowed to dry until there is about a 1/4 inch thick wax pattern made of the artists’ original. It is very important to note that the wax pattern is a hollow duplicate of the artists’ original. Now the wax pattern is taken to the wax “chasing” room of the foundry. Here much time is dedicated to the restoration of the wax pattern to the exact likeness of the artist original. All bubbles and imperfections are “chased” away in this process. Eventually there will need to be a way for the hot, molten bronze to funnel its way into a ceramic type mold, shown here the wax pattern is sprued and mounted on a wax cup. The red spures serve as gates and vents later in the process. Notice the wax trees are then taken to what is known as the slurry room where the time consuming process of building the ceramic shell will begin. First the wax tree is dipped into a slurry tub and coated. The slurry itself is basically made up of colloidal silica. While it is still wet, the tree is coated with the first layer of sand which is made up of fused silica. This process takes about 8 days to complete. Each day it is dipped in slurry and once again coated with the silica sand. The silica sand used goes from very coarse to very fine beginning to end. Eventually the shell will be approximately 1/2 inch thick. The complete, dry shell (remember it still contains the wax pattern inside) is placed in the burnout kiln where the shell is cured and the wax pattern is melted out, hence the term “lost wax”. Each time another number in the edition is cast a new wax pattern must be made from the mother mold which is again lost in the process. Now the shell is ready to receive the molten bronze. It is poured at a temperature of about 2,000 F. After the bronze is cooled, the shell cracks on its own accord and is manually removed from the bronze. This could also be called the “lost shell” method if casting. The sculpture is now “metal on the floor”. Any gates and vents are removed from each section of the sculpture and the pieces are then welded back together. One can realize the tremendous time and labor involved just up to this point. Once the pieces of the sculpture have been reunited, or welded back together, the weld lines are then tooled out and any imperfections in the metal are corrected. This takes place in the metal room where the critical talent of the artisan’s transforms the parts into a hollow bronze duplicate of the original clay model. The completed metal sculpture is then heated with a torch in order to make it ready to receive patina. The patina process is the result of chemical and heat applied in layers. This is an art in itself and requires years of training to master. No two patinas can turn out exactly alike. It can take anywhere from 8 to 16 weeks for one casting depending how busy a foundry is. In conclusion, remember that as an example if there are going to be 100 bronze casting in the edition, this whole process is done over and over for each number in the edition. They are truly original castings. The only step that can be “re-used” in casting another number in the edition is the “mother mold” in the very beginning. Once all numbers have been cast (the amount of numbers is decided by the artist before casting begins), the mother mold is destroyed. Custom Works Of Art Are Non-Refundable. We sell our bronze sculptures as reproductions, unless the title indicate it as original. Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024 A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. Bronze Sculpture Casting Tour The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy The Lost Wax Casting Process Here Artist original clay sculpture is nearly ready for the foundry. The item “Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze” is in sale since Friday, November 24, 2017. This item is in the category “Art\Art Sculptures”. The seller is “79_dollar_bargains” and is located in Mineola, New York. This item can be shipped worldwide.
  • Originality: Original
  • Listed By: Dealer or Reseller
  • Medium: Bronze
Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine. Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024. A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. This sculpture is Abstract Figurative Bronze Angel sculptures or statues for Sale. This Limited Edition original was designed using the lost wax method that allows for the excellent quality of the piece. It is numbered by the artist Watson. Bronze Sculpture Casting Tour. The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy. The Lost Wax Casting Process. Here Artist original clay sculpture is nearly ready for the foundry. Note the artist is still adding the finishing touches. Most sculptors prefer to work with clay or wax; some however, do use wood and other mediums. Here the finished original clay is now complete. The first step can be shocking for some as they begin to decide how this original will be cut up. In order to prepare the original clay sculpture for molding, it will be dissected by cutting the clay with wire and by cutting the armature with a saw. The armature is what helped support the clay in place while the artist was creating it. Note the registration marks which later in the process will serve to realign the parts. Shown here are the sections of the original clay sculpture after having been dissected. Now the various parts of the original are carefully mounted on clay plugs before the rubber mold material is applied. The clay plug later serves as a pour spout for the mold. As you can see now they begin painting the latex rubber onto the original together with the clay plus that’s been added in layers. Notice the shim line that will alter serve as a separation line for dividing the mold in half. A lock and tab system has been applied (see the edge) so that the mold will be able to be opened and closed securely. Once the rubber mold has been completed, a plaster or fiberglass “mother” mold is applied to the outside which will preserve the integrity of the rubber mold. The “mother” mold is now complete, the next step is to separate the two halves of the mold and remove the original from inside. The next step is to remove the artists’ original and reassemble the clean, empty mold. Now a way pattern will be poured by building several layers of the hot wax within the rubber mold. A layer is poured, allowed to dry until there is about a 1/4 inch thick wax pattern made of the artists’ original. It is very important to note that the wax pattern is a hollow duplicate of the artists’ original. Now the wax pattern is taken to the wax “chasing” room of the foundry. Here much time is dedicated to the restoration of the wax pattern to the exact likeness of the artist original. All bubbles and imperfections are “chased” away in this process. Eventually there will need to be a way for the hot, molten bronze to funnel its way into a ceramic type mold, shown here the wax pattern is sprued and mounted on a wax cup. The red spures serve as gates and vents later in the process. Notice the wax trees are then taken to what is known as the slurry room where the time consuming process of building the ceramic shell will begin. First the wax tree is dipped into a slurry tub and coated. The slurry itself is basically made up of colloidal silica. While it is still wet, the tree is coated with the first layer of sand which is made up of fused silica. This process takes about 8 days to complete. Each day it is dipped in slurry and once again coated with the silica sand. The silica sand used goes from very coarse to very fine beginning to end. Eventually the shell will be approximately 1/2 inch thick. The complete, dry shell (remember it still contains the wax pattern inside) is placed in the burnout kiln where the shell is cured and the wax pattern is melted out, hence the term “lost wax”. Each time another number in the edition is cast a new wax pattern must be made from the mother mold which is again lost in the process. Now the shell is ready to receive the molten bronze. It is poured at a temperature of about 2,000 F. After the bronze is cooled, the shell cracks on its own accord and is manually removed from the bronze. This could also be called the “lost shell” method if casting. The sculpture is now “metal on the floor”. Any gates and vents are removed from each section of the sculpture and the pieces are then welded back together. One can realize the tremendous time and labor involved just up to this point. Once the pieces of the sculpture have been reunited, or welded back together, the weld lines are then tooled out and any imperfections in the metal are corrected. This takes place in the metal room where the critical talent of the artisan’s transforms the parts into a hollow bronze duplicate of the original clay model. The completed metal sculpture is then heated with a torch in order to make it ready to receive patina. The patina process is the result of chemical and heat applied in layers. This is an art in itself and requires years of training to master. No two patinas can turn out exactly alike. It can take anywhere from 8 to 16 weeks for one casting depending how busy a foundry is. In conclusion, remember that as an example if there are going to be 100 bronze casting in the edition, this whole process is done over and over for each number in the edition. They are truly original castings. The only step that can be “re-used” in casting another number in the edition is the “mother mold” in the very beginning. Once all numbers have been cast (the amount of numbers is decided by the artist before casting begins), the mother mold is destroyed. Custom Works Of Art Are Non-Refundable. We sell our bronze sculptures as reproductions, unless the title indicate it as original. Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024 A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. Bronze Sculpture Casting Tour The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy The Lost Wax Casting Process Here Artist original clay sculpture is nearly ready for the foundry. The item “Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze” is in sale since Sunday, November 19, 2017. This item is in the category “Art\Art Sculptures”. The seller is “79_dollar_bargains” and is located in Mineola, New York. This item can be shipped worldwide.
  • Originality: Original
  • Listed By: Dealer or Reseller
  • Medium: Bronze
Large Wooden Silver Angel Wings 71 cm High. BEAUTIFUL Wall Hangings. Free P&P

Large Wooden Silver Angel Wings 71 cm High. BEAUTIFUL Wall Hangings. Free P&P

Large Wooden Silver Angel Wings 71 cm High. BEAUTIFUL Wall Hangings. Free P&P

Large Wooden Silver Angel Wings 71 cm High. BEAUTIFUL Wall Hangings. Free P&P

This pair of angel wings will look stunning hanging on your wall or perhaps propped up somewhere. The silver colour is not a solid block of colour, it is shaded and has a warm glow to it – difficult to describe, perhaps more of a silver gilt. More beautiful than the photos show. Each one measures approx 71 cm high and is made from a solid piece of wood. Beware of similar products that are made from lightweight materials; these two are substantial. The item “Large Wooden Silver Angel Wings 71 cm High. BEAUTIFUL Wall Hangings. Free P&P” is in sale since Wednesday, November 08, 2017. This item is in the category “Home, Furniture & DIY\Home Decor\Wall Hangings”. The seller is “lofthousetrading” and is located in Chelmsford. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Chile.
  • Main Colour: Silver
Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings

Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Features: ECE Approved Lightweight durable ABS shell Breathable lining Easy to Control, Retractable Anti-scratch Inner Sun Visor High quality HD silver-plated lens Anti-UV, anti-dlizziness, can obstruct 98% UV, perfect protect eyes and skin EPS Impact Absorption Inner Liner Detachable padding Ventilation. Dynamic balancing system ensure excellent air flow in the helmet. Deist circulation system excretes fog on the lens effectively Durable chin buckle, can bear 100kg weight. Adopted laddering bucklet design, can be adjusted to suitable head measurement, more comfortable EPR Lining. With 3D profiling technology, lining can keep shape for long. Cooperated with EPS ventilation channel, will excrete heat and moisture quickly Unique design Specification: Brand: Beon Model No. B-500 Safety Standard: EU ECE Net Weight: 1450g Shell Material: ABS Lining: Detachable Measurements: A small metal tape measure, or a cloth tape may be used to take your measurement. If possible, have an assistant do the measuring for a more accurate measurement. The circumference of the head should be measured from the forehead, approximately one inch above the eyebrows, or at whatever point gives the largest possible measurement. Helmet MUST fit snugly on your head, PLEASE DO NOT sacrifice safety for comfort. Helmets are designed to absorb shock energy during impact, and a loose fitting helmet greatly reduces its safety. (Do not count holidays and weekends). USA, Canada, Singapore, Australia, Japan, Asia. France, Eastern Europe, Middle-East Asia. Russia, Brazil, Italy, Chile, South America. If you don’t receive it beyond 25 days , please contact your local post to check your parcel and tell us. What should I do if I didn’t receive my item? What should I do if the item I receive is damaged or not working? We very care about our valued buyers, if you have any questions, our Customer Service staff will be very glad to help you. About item: for the functional products in our shop (such as: Chargers, Data cables), we make sure that the functions are the same as description, but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance. Your recognition will make us more confident to develop business and serve you better. We understand the concerns and frustrations you might have, and will do our endeavor to solve the issues. Please give us the opportunity to solve any problem. The item “Beon Motorcycle Full Face Helmet High Performance Street Bike Helmet Angel Wings” is in sale since Saturday, September 05, 2015. This item is in the category “eBay Motors\Parts & Accessories\Apparel & Merchandise\Helmets & Headwear\Helmets”. The seller is “louisa.outdoor1120″ and is located in , . This item can be shipped worldwide.
  • Brand: Beon
  • Gender: Unisex Adult
  • Country/Region of Manufacture: China
Hazel Bowman Angel Wings Large Framed Art Print High Quality Drawing Dancer

Stunning Framed Print – Hazel Bowman Angel Wings &##xA0. Print size – 60 x 80 cm – Framed size 70 x 90 cm – &###xA3;59.97&##xA0. Please bear this in mind and order early to avoid any&###xA0;disappointment. ECM Sales provides a wide range of quality art alongside limited edition framed sports memorabilia – have a look at the rest of our range of available products. Any queries please ask. See our other items. The item “Hazel Bowman Angel Wings Large Framed Art Print High Quality Drawing Dancer” is in sale since Sunday, October 09, 2016. This item is in the category “Art\Prints\Contemporary (1980-Now)\Open Editions”. The seller is “ecmsales” and is located in Portsmouth. This item can be shipped worldwide.
  • Self-Representing Artist?: No
  • Signed?: Unsigned
  • Type: Modern – Open Edition
  • Subject: People & Portraits
  • Original// Repro: Reproduction
Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag

Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag

Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag

Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag

Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag

Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag

Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings w/ Original Paper Tag. Wonderful condition no chips or cracks! All claims for damaged merchandise must be made within 24 hours from the date that the merchandise was received. If you decide to file a claim with the shipper directly, please notify me. The item “Vtg Radko ANGEL ON HIGH Ornament LARGE Die Cut Wings 1997 with Original Paper Tag” is in sale since Friday, April 01, 2016. This item is in the category “Collectibles\Decorative Collectibles\Decorative Collectible Brands\Christopher Radko”. The seller is “primeauvintage” and is located in Burnsville, Minnesota. This item can be shipped to United States, to Canada, to United Kingdom, DK, RO, SK, BG, CZ, FI, HU, LV, LT, MT, EE, to Australia, GR, PT, CY, SI, to Japan, to China, SE, KR, ID, to Taiwan, ZA, TH, to Belgium, to France, to Hong Kong, to Ireland, to Netherlands, PL, to Spain, to Italy, to Germany, to Austria, RU, IL, to Mexico, to New Zealand, PH, SG, to Switzerland, NO, SA, UA, AE, QA, KW, BH, HR, MY, BR, CL, CO, CR, DO, PA, TT, GT, SV, HN, JM, AG, AW, BZ, DM, GD, KN, LC, MS, TC, BB, BD, BM, BN, BO, EC, EG, GF, GG, GI, GP, IS, JE, JO, KH, KY, LI, LK, LU, MC, MO, MQ, MV, NI, OM, PE, PK, PY, RE.
  • Country//Region of Manufacture: Germany
Angel Wings Genuine Leather Vest Jacket High Quality Free Shipping + All Sizes

Angel Wings Genuine Leather Vest Jacket High Quality Free Shipping + All Sizes

Angel Wings Genuine Leather Vest Jacket High Quality Free Shipping + All Sizes

Angel Wings Genuine Leather Vest Jacket High Quality Free Shipping + All Sizes

100% premium designer jacket made of High Quality Genuine Leather. ¬¨Material: High quality Genuine Leather. SIZE (Measured in Inches). CHEST SIZE TO FIT. Products are delivered in 3 to 7 bussiness days at your doorstep. If the item is not in stock it will be delivered from overseas factories. We offer our customers the best quality product. Please Check our other products too. The item “Angel Wings Genuine Leather Vest Jacket High Quality Free Shipping + All Sizes” is in sale since Thursday, May 05, 2016. This item is in the category “Clothing, Shoes, Accessories\Men’s Clothing\Vests”. The seller is “msfashion15″ and is located in Rockdale, New South Wales. This item can be shipped worldwide.
  • Brand: MS-Fashion Sydney
  • Size: XS,S,M,L,XL,2XL,3XL,4XL
  • Colour: Black