Large Angel Wings
Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Ascending Angel Sculpture Product Code: W675 Weight: 28 lbs (12.7 kg) Dimensions: 15.5″W x 15.5″D x 40.5H (39 cm x 39 cm x 103 cm) Made of resin Ascending Angel Sculpture. Weve rarely seen a sculpture rendered with the skillful detail of this gauze-draped angel being pulled toward the heavens. The artist has captured a classical pose full of spiritual rapture with this dramatic, more than yard-tall work of sculptural art. Our itemis cast in quality designer resin with a rich, two-toned finish. Now also available in a new, smaller size. Shown atop our Large Classic Statuary Plinth. See below for more ideas. Finish: two-toned finish THIS ITEM IS BRAND NEW! Please note that you will need to present a proof of the damage emailing us pictures is acceptable. Visit our store for more great products! Feel free to ask any questions you may have. The item “Large Winged Angel Ascending Statue Sculpture 40″ is in sale since Friday, December 08, 2017. This item is in the category “Art\Art Sculptures”. The seller is “sculpture_collection” and is located in US. This item can be shipped worldwide.
Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor. About This Patio Angel Statue. This graceful Tall Angel Statue in rust tones will be a lovely addition to any garden or indoor place. Calming yet electrifying, she will spread her wings and keep a close watch on your yard decor even as she beautifies it. She has a very pleasant face and she holds a bouquet of roses in her right hand. This tall garden statue made of resin with an iron rust finish will blend in seamlessly with any natural. Or use as a distinctive indoor statue in a large room or foyer. Patio Angel Statue Features. Angel Statue with roses in rust tones. Iron rust finish. Ightweight cast resin construction. It does have enough weight to stay in place yet is light enough if you need to reposition it. Detailed figure, wings and flowers. Omes in 2 pieces, her body and her wings and fits together easily. 41 1/2″ high x 23″ wide x 13 deep. Weighs 26.5 lbs. To the lower 48 USA states only. Its for your safety. Your feedbacks are extremely important to us and to other buyers too. Your opinions and comments will help to excel our standards by offering more quality products and keeping the existing prices even lower. All items are in stock at the time of listing. We try our best to reply to your emails as soon as possible, however, due to a high volume of daily incoming emails, we may not be able to reply your emails immediately. Please allow 1-2 days for us to response. Thank You For Your Business! The item “Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor” is in sale since Saturday, December 02, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Décor\Statues & Lawn Ornaments”. The seller is “myhomeeshop” and is located in Maryland, New York. This item can be shipped to United States.
  • Brand: KSH DECOR
  • MPN: 893764
  • Theme: Angels & Cherubs
  • Bundle Listing: No
  • Size: Standard
  • Country/Region of Manufacture: Unknown
  • Color: Rust
  • Material: Cast Resin
  • Shape: Angel Statue
  • Type: Statue
Pet Memorial Statue Dog Garden Large Outdoor Statues With Angel Wings White Best

Pet Memorial Statue Dog Garden Large Outdoor Statues With Angel Wings White Best

Pet Memorial Statue Dog Garden Large Outdoor Statues With Angel Wings White Best. Dimensions: 15.5″Wx7.5″Dx12.5H 5 lbs. Hand-cast using real crushed stone bonded with high quality designer resin. Each piece is individually hand-finished by our artisans. Each piece is individually hand-painted in a faux stone finish. Exclusive to the Design Toscano brand and perfect for your home or garden. Preserve a treasured memory for yourself or a loved one with this dog memorial tribute cast in quality designer resin and hand-painted one piece at a time. Our Design Toscano exclusive remembers a beloved dog, remind us that Special friends live in our hearts forever. Whether in a special spot in your home or in a favorite garden spot, this thoughtful and healing gift honors a never-to-be-forgotten pet’s memory. 15and 1/2″Wx7and 1/2″Dx12and 1/2H. Our stock all ships from our US-based warehouses. You may also like. The item “Pet Memorial Statue Dog Garden Large Outdoor Statues With Angel Wings White Best” is in sale since Thursday, November 30, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Décor\Statues & Lawn Ornaments”. The seller is “sbpremiumstore” and is located in Chicago, Illinois. This item can be shipped to United States.
  • Material: Resin
  • Type: Sculpture
  • Color: Gray
  • Theme: Animals
  • Shape: Dog
  • Features: Hand-Painted
24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine

24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine

24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine

24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine

24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine

24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine

Large Winged Guardian artistic nude angel. Condition: New In Box. H: 24.5 inches. All sales are FINAL. No consignment or guaranteed sales. What is Cold Cast Bronze? Cold cast bronze is made by the combination of a resin and powdered metal, real bronze metal, and a catalyst manufactured at room temperature. Cold cast bronze is a relatively new material which has been developed over the last 20 years or so. Becoming a very popular choice recently for use in the Manufacturing of Sculptures and Figurines due to the stunning finish achievable and the very tactile feel of the finished works. This Is Not A 100% Bronze Statue. This Piece Is Made With Cold Cast Bronze. We carry many other similar Bronze Figurines items in our Bronze Figurines Collection. Please be sure to check out our full product line which continuously has items being added to it. You won’t be disappointed! The item “24 Large Winged Guardian artistic nude angel Statue Sculpture Figurine” is in sale since Wednesday, November 29, 2017. This item is in the category “Collectibles\Decorative Collectibles\Figurines\People”. The seller is “fivestarsplus13″ and is located in San Diego, California. This item can be shipped worldwide.
Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor

Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor. About This Patio Angel Statue. This graceful Tall Angel Statue in rust tones will be a lovely addition to any garden or indoor place. Calming yet electrifying, she will spread her wings and keep a close watch on your yard decor even as she beautifies it. She has a very pleasant face and she holds a bouquet of roses in her right hand. This tall garden statue made of resin with an iron rust finish will blend in seamlessly with any natural. Or use as a distinctive indoor statue in a large room or foyer. Patio Angel Statue Features. Angel Statue with roses in rust tones. Iron rust finish. Ightweight cast resin construction. It does have enough weight to stay in place yet is light enough if you need to reposition it. Detailed figure, wings and flowers. Omes in 2 pieces, her body and her wings and fits together easily. 41 1/2″ high x 23″ wide x 13 deep. Weighs 26.5 lbs. To the lower 48 USA states only. Its for your safety. Your feedbacks are extremely important to us and to other buyers too. Your opinions and comments will help to excel our standards by offering more quality products and keeping the existing prices even lower. All items are in stock at the time of listing. We try our best to reply to your emails as soon as possible, however, due to a high volume of daily incoming emails, we may not be able to reply your emails immediately. Please allow 1-2 days for us to response. Thank You For Your Business! The item “Large Angel Statue With Roses Wings 41 Sculpture Garden Lawn Home Art Decor” is in sale since Wednesday, November 29, 2017. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Garden Décor\Statues & Lawn Ornaments”. The seller is “myhomeeshop” and is located in Maryland, New York. This item can be shipped to United States.
  • Brand: KSH DECOR
  • MPN: 893764
  • Type: Angel Statue
  • Bundle Listing: No
  • Country/Region of Manufacture: Unknown
  • Shape: Angel
  • Theme: Angels & Cherubs
  • Color: Rust
  • Size: Standard
  • Material: Cast Resin
Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine. Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024. A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. This sculpture is Abstract Figurative Bronze Angel sculptures or statues for Sale. This Limited Edition original was designed using the lost wax method that allows for the excellent quality of the piece. It is numbered by the artist Watson. Bronze Sculpture Casting Tour. The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy. The Lost Wax Casting Process. Here Artist original clay sculpture is nearly ready for the foundry. Note the artist is still adding the finishing touches. Most sculptors prefer to work with clay or wax; some however, do use wood and other mediums. Here the finished original clay is now complete. The first step can be shocking for some as they begin to decide how this original will be cut up. In order to prepare the original clay sculpture for molding, it will be dissected by cutting the clay with wire and by cutting the armature with a saw. The armature is what helped support the clay in place while the artist was creating it. Note the registration marks which later in the process will serve to realign the parts. Shown here are the sections of the original clay sculpture after having been dissected. Now the various parts of the original are carefully mounted on clay plugs before the rubber mold material is applied. The clay plug later serves as a pour spout for the mold. As you can see now they begin painting the latex rubber onto the original together with the clay plus that’s been added in layers. Notice the shim line that will alter serve as a separation line for dividing the mold in half. A lock and tab system has been applied (see the edge) so that the mold will be able to be opened and closed securely. Once the rubber mold has been completed, a plaster or fiberglass “mother” mold is applied to the outside which will preserve the integrity of the rubber mold. The “mother” mold is now complete, the next step is to separate the two halves of the mold and remove the original from inside. The next step is to remove the artists’ original and reassemble the clean, empty mold. Now a way pattern will be poured by building several layers of the hot wax within the rubber mold. A layer is poured, allowed to dry until there is about a 1/4 inch thick wax pattern made of the artists’ original. It is very important to note that the wax pattern is a hollow duplicate of the artists’ original. Now the wax pattern is taken to the wax “chasing” room of the foundry. Here much time is dedicated to the restoration of the wax pattern to the exact likeness of the artist original. All bubbles and imperfections are “chased” away in this process. Eventually there will need to be a way for the hot, molten bronze to funnel its way into a ceramic type mold, shown here the wax pattern is sprued and mounted on a wax cup. The red spures serve as gates and vents later in the process. Notice the wax trees are then taken to what is known as the slurry room where the time consuming process of building the ceramic shell will begin. First the wax tree is dipped into a slurry tub and coated. The slurry itself is basically made up of colloidal silica. While it is still wet, the tree is coated with the first layer of sand which is made up of fused silica. This process takes about 8 days to complete. Each day it is dipped in slurry and once again coated with the silica sand. The silica sand used goes from very coarse to very fine beginning to end. Eventually the shell will be approximately 1/2 inch thick. The complete, dry shell (remember it still contains the wax pattern inside) is placed in the burnout kiln where the shell is cured and the wax pattern is melted out, hence the term “lost wax”. Each time another number in the edition is cast a new wax pattern must be made from the mother mold which is again lost in the process. Now the shell is ready to receive the molten bronze. It is poured at a temperature of about 2,000 F. After the bronze is cooled, the shell cracks on its own accord and is manually removed from the bronze. This could also be called the “lost shell” method if casting. The sculpture is now “metal on the floor”. Any gates and vents are removed from each section of the sculpture and the pieces are then welded back together. One can realize the tremendous time and labor involved just up to this point. Once the pieces of the sculpture have been reunited, or welded back together, the weld lines are then tooled out and any imperfections in the metal are corrected. This takes place in the metal room where the critical talent of the artisan’s transforms the parts into a hollow bronze duplicate of the original clay model. The completed metal sculpture is then heated with a torch in order to make it ready to receive patina. The patina process is the result of chemical and heat applied in layers. This is an art in itself and requires years of training to master. No two patinas can turn out exactly alike. It can take anywhere from 8 to 16 weeks for one casting depending how busy a foundry is. In conclusion, remember that as an example if there are going to be 100 bronze casting in the edition, this whole process is done over and over for each number in the edition. They are truly original castings. The only step that can be “re-used” in casting another number in the edition is the “mother mold” in the very beginning. Once all numbers have been cast (the amount of numbers is decided by the artist before casting begins), the mother mold is destroyed. Custom Works Of Art Are Non-Refundable. We sell our bronze sculptures as reproductions, unless the title indicate it as original. Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024 A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. Bronze Sculpture Casting Tour The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy The Lost Wax Casting Process Here Artist original clay sculpture is nearly ready for the foundry. The item “Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze” is in sale since Friday, November 24, 2017. This item is in the category “Art\Art Sculptures”. The seller is “79_dollar_bargains” and is located in Mineola, New York. This item can be shipped worldwide.
  • Originality: Original
  • Listed By: Dealer or Reseller
  • Medium: Bronze
31 Large Angel Wings Sculpture Statue (Xoticbrands)

In the exquisite sculptural style of the mid-18th century masters, artist Jaimy has captured every angelic detail of this powerfully emotional angel, from her elegant wings to her impressively muscular form. With three sizes from which to choose, this fine memorial sculpt is cast in quality designer resin and hand-painted one piece at a time to enhance every sculptural detail. Our garden angel showcases emotion often challenging to capture in a sculpture and is an investment in spiritual art sure to be the focal point of any home or garden setting. Medium: 4″Wx6½”Dx15H. Large: (Shown) 8″Wx11″Dx30½H. Grande: 14″Wx19½”Dx47 H. Large size base is 8.5″W x 11″D Large size fits on Large Classic plinth (NG314100), Grande Laurel plinth (KY3917), Rococo plinth (KY0631), Grand Scale Rosette plinth (CL5193), Classical Fluted plinth (KY2273), Grand Garden English plinth (NE140502) and Lion of Florence Sentinel base (KY727) Medium size base is 4″W x 6.5″D Medium size fits on all available plinths. The item “31 Large Angel Wings Sculpture Statue (Xoticbrands)” is in sale since Thursday, November 23, 2017. This item is in the category “Collectibles\Decorative Collectibles\Figurines\Angels”. The seller is “xoticbrands” and is located in Houston, Texas. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.
Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze

Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine. Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024. A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. This sculpture is Abstract Figurative Bronze Angel sculptures or statues for Sale. This Limited Edition original was designed using the lost wax method that allows for the excellent quality of the piece. It is numbered by the artist Watson. Bronze Sculpture Casting Tour. The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy. The Lost Wax Casting Process. Here Artist original clay sculpture is nearly ready for the foundry. Note the artist is still adding the finishing touches. Most sculptors prefer to work with clay or wax; some however, do use wood and other mediums. Here the finished original clay is now complete. The first step can be shocking for some as they begin to decide how this original will be cut up. In order to prepare the original clay sculpture for molding, it will be dissected by cutting the clay with wire and by cutting the armature with a saw. The armature is what helped support the clay in place while the artist was creating it. Note the registration marks which later in the process will serve to realign the parts. Shown here are the sections of the original clay sculpture after having been dissected. Now the various parts of the original are carefully mounted on clay plugs before the rubber mold material is applied. The clay plug later serves as a pour spout for the mold. As you can see now they begin painting the latex rubber onto the original together with the clay plus that’s been added in layers. Notice the shim line that will alter serve as a separation line for dividing the mold in half. A lock and tab system has been applied (see the edge) so that the mold will be able to be opened and closed securely. Once the rubber mold has been completed, a plaster or fiberglass “mother” mold is applied to the outside which will preserve the integrity of the rubber mold. The “mother” mold is now complete, the next step is to separate the two halves of the mold and remove the original from inside. The next step is to remove the artists’ original and reassemble the clean, empty mold. Now a way pattern will be poured by building several layers of the hot wax within the rubber mold. A layer is poured, allowed to dry until there is about a 1/4 inch thick wax pattern made of the artists’ original. It is very important to note that the wax pattern is a hollow duplicate of the artists’ original. Now the wax pattern is taken to the wax “chasing” room of the foundry. Here much time is dedicated to the restoration of the wax pattern to the exact likeness of the artist original. All bubbles and imperfections are “chased” away in this process. Eventually there will need to be a way for the hot, molten bronze to funnel its way into a ceramic type mold, shown here the wax pattern is sprued and mounted on a wax cup. The red spures serve as gates and vents later in the process. Notice the wax trees are then taken to what is known as the slurry room where the time consuming process of building the ceramic shell will begin. First the wax tree is dipped into a slurry tub and coated. The slurry itself is basically made up of colloidal silica. While it is still wet, the tree is coated with the first layer of sand which is made up of fused silica. This process takes about 8 days to complete. Each day it is dipped in slurry and once again coated with the silica sand. The silica sand used goes from very coarse to very fine beginning to end. Eventually the shell will be approximately 1/2 inch thick. The complete, dry shell (remember it still contains the wax pattern inside) is placed in the burnout kiln where the shell is cured and the wax pattern is melted out, hence the term “lost wax”. Each time another number in the edition is cast a new wax pattern must be made from the mother mold which is again lost in the process. Now the shell is ready to receive the molten bronze. It is poured at a temperature of about 2,000 F. After the bronze is cooled, the shell cracks on its own accord and is manually removed from the bronze. This could also be called the “lost shell” method if casting. The sculpture is now “metal on the floor”. Any gates and vents are removed from each section of the sculpture and the pieces are then welded back together. One can realize the tremendous time and labor involved just up to this point. Once the pieces of the sculpture have been reunited, or welded back together, the weld lines are then tooled out and any imperfections in the metal are corrected. This takes place in the metal room where the critical talent of the artisan’s transforms the parts into a hollow bronze duplicate of the original clay model. The completed metal sculpture is then heated with a torch in order to make it ready to receive patina. The patina process is the result of chemical and heat applied in layers. This is an art in itself and requires years of training to master. No two patinas can turn out exactly alike. It can take anywhere from 8 to 16 weeks for one casting depending how busy a foundry is. In conclusion, remember that as an example if there are going to be 100 bronze casting in the edition, this whole process is done over and over for each number in the edition. They are truly original castings. The only step that can be “re-used” in casting another number in the edition is the “mother mold” in the very beginning. Once all numbers have been cast (the amount of numbers is decided by the artist before casting begins), the mother mold is destroyed. Custom Works Of Art Are Non-Refundable. We sell our bronze sculptures as reproductions, unless the title indicate it as original. Bronze Sculpture Large Statuette Modern Angel Crossed Legs Hand Made Figurine Condition: This sculpture is in perfect condition. Bronze Dimensions :Height 17″ X Width 15″ Weight : 7 LBS Inventory : 42XN1745B9024 A sculpture titled’Guardian of the Light (Verdi bronze abstract Angel sculpture statue)’ by artist Milo in the category Garden Or Yard / Outside and Outdoor Sculptures. Bronze Sculpture Casting Tour The process of bringing a bronze sculpture to life using the lost-wax method is something you’ll appreciate after taking this tour- Enjoy The Lost Wax Casting Process Here Artist original clay sculpture is nearly ready for the foundry. The item “Angel, Large Winged Female High Relief Sculpture, Figurative Statue 100% Bronze” is in sale since Sunday, November 19, 2017. This item is in the category “Art\Art Sculptures”. The seller is “79_dollar_bargains” and is located in Mineola, New York. This item can be shipped worldwide.
  • Originality: Original
  • Listed By: Dealer or Reseller
  • Medium: Bronze
RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder

Antique Victorian Cast iron Garden Angelic Winged creature Candle holder. Rare one of a kind. Measure: 13″ tall 10″ wide, 8.5 out from wall. The item “RARE Large Cast Iron Victorian Garden Statue Winged Angel Candleholder” is in sale since Thursday, November 16, 2017. This item is in the category “Antiques\Architectural & Garden\Garden”. The seller is “hollywoodvintagecloths” and is located in Daytona Beach, Florida. This item can be shipped to United States.
  • Color: Rustic
  • Material: Cast Iron
Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Large Winged Angel Ascending Statue Sculpture 40

Ascending Angel Sculpture Product Code: W675 Weight: 28 lbs (12.7 kg) Dimensions: 15.5″W x 15.5″D x 40.5H (39 cm x 39 cm x 103 cm) Made of resin Ascending Angel Sculpture. Weve rarely seen a sculpture rendered with the skillful detail of this gauze-draped angel being pulled toward the heavens. The artist has captured a classical pose full of spiritual rapture with this dramatic, more than yard-tall work of sculptural art. Our itemis cast in quality designer resin with a rich, two-toned finish. Now also available in a new, smaller size. Shown atop our Large Classic Statuary Plinth. See below for more ideas. Finish: two-toned finish THIS ITEM IS BRAND NEW! Please note that you will need to present a proof of the damage emailing us pictures is acceptable. Visit our store for more great products! Feel free to ask any questions you may have. The item “Large Winged Angel Ascending Statue Sculpture 40″ is in sale since Wednesday, November 08, 2017. This item is in the category “Art\Art Sculptures”. The seller is “sculpture_collection” and is located in US. This item can be shipped worldwide.